BBS Motor Series Installation Video Guide

15 Steps Installation Video👇

Key Time👇

00:03 All installation accessories display
00:05 Step 1: Remove Chainring, Crank Arms and Bottom Bracket
00:17 Step 2: Install Chainring Using M5 Bolts
00:21 Step 3: Install Chain Guard Using Supplied Screws
00:24 Step 4: Slide Motor Assembly into Bottom Brakect Shell
00:27 Step 5: Secure Motor with Y-shaped Motor Mount Bracket on Left Side
00:41 Step 6: Install Crank Arms
00:50 Step 7: Install Chain
00:57 Step 8: Connect Wiring Harness into Motor Assembly
01:01 Step 9: Connect Front Lamp, Speed Sensor and Gear Sensor
01:14 Step 10: Slide Brake Lever onto Handlebar and Tighten
01:24 Step 11: Install Thumb Throttle
01:33 Step 12: Install Display to Your Handlebars
01:45 Step 13: Install Battery Mount
02:00 Step 14: Install the Batter on the Mount
02:04 Step 15: Power On and Check the System